-40%

Dental Mobile Digital LK-C27 X-Ray Film Machine X-Ray Film Processor in Darkroom

$ 47.51

Availability: 15 in stock
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • Country/Region of Manufacture: China
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • All returns accepted: Returns Accepted
  • MPN: X1460300201
  • Condition: New
  • Brand: Unbranded
  • Intended Use/Discipline: Dental Laboratory

    Description

    Item Description
    LK-C27
    Fetures:
    1.This portable dental X-ray unit is high frequency machine.
    2.The body is small, light weight and nearly no radiation.
    3.It has excellent image quality, portable storage, save more space.
    4.It uses high frequency and DC international power supply.
    5.All of the components installed in the central PC board concentrated.  Shock,set-up, electron tubes, all of them are insulation vacuum, sealed  stereotype protection.
    6.There are also manual buttons installed on the surface of shell, as well as  batteries and charges7.This unit mainly suitable for oral pre-treatment for  learning internal organizational structure, root depth and so on, is  indispensable in daily life clinic equipment, especially for dental implant  surgery.
    8. It also can connect with sensor, is great convenience.
    9.  The battery is durable, it can take about 5 hundred images after  fully charged.
    10. It can be connected with intra-oral digital X-ray imaging system.
    Warning: After turning on the machine, wait for 1 minute, the voltage can be stabilized before normal use

    After each photo taking, you need to wait for the normal value to return before taking a normal photo

    Technical Parameter:
    Tube voltage: 60KV
    Tube current: 1mA
    Exposure time: 0.1--2.0s
    Frequency: 30KHz
    Rate power: 60VA
    Distance from skin to cone: 130mm
    Tube focus: 0.3mm*0.3mm
    Battery: DC14.8V  6400mAh
    Output voltage: DC16.8V
    Ambient temperature: 5

    ~40

    Relative temperature: <75%RH
    Net weight: 2.5KG
    Gross weight: 3.5KG
    Size(mm): 138*165*185
    Package size(mm): 220*240*275
    Packing List:
    Main body 1pc
    User manual 1pc
    Operation of the Main Unit
    1. Upon receiving, open the box and check the product for possible damage during shipping.
    2. Make sure the fittings on the encasement list are packaged within the box.
    3. Connect the six-core cable (of the Main Unit) to the joint of the ball head and tighten the screw
    4. After the Main Unit and ball head are perfectly fit together, in the international standard
    electrical source, grounding is strongly recommended.
    5. Turn on the Power; the pilot lamp will be light up.During this time, the digital tube of the main unit
    will show the fore setting time. Now the equipment is in standby mode.
    6. Setting the time (Skip to next step if unneeded) Use the "SET", "+", and" -" buttons to reset the time
    as follows: press SET, the pilot lamp above is illuminated, the machine is now in the time setting
    mode→then press "+" and" -" to set the time needed (time range is 0.5-9seconds); press set again when
    the time is adjusted the light lamp is off. The equipment is now in standby mode.
    7. Put the Tooth film plumb behind the tooth which is going to be taken picture, and be as close as possible (the smooth side stick to the tooth)
    8. Keep the ball head plumb to the tooth projection position; Have the ball head, tooth, and tooth film steadily mutually plumb.
    9. After positioning, use theEXP on the main Unit, the remote controller, or the button on the touch head tube to take pictures. The three methods have the same effect. (Notice: gently press)
    10. After exposure to the tube, release the start button again (available in three ways) in case of an emergency to stop shooting and return to standby status. (At this point there was no output ray, so the dental films can be used again).
    Repeat step 6 to reset the picturing time.To repeat the picturing process, please repeat steps 7 to 9.
    11. Turn the power of the main unit off when the work is finished, press POWER, making sure the pilot
    lamp is off. Don't keep the main unit long in standby mode.
    Points for Attention
    1.
    Make sure the angle of film, tooth, and b
    all head are properly aligned when taking a picture. Keep them steady until the last step of picturing;
    making sure that there is no change in any of their positions.
    2.
    Remember to turn the power offwhen work is done.
    3.
    Change the battery if the remote controller loses its functioning or if the remote's distance is shorted.
    4.
    After turning the power on, wait one minute before taking pictures, this allows the ray to provide a
    steady output.
    5.
    The equipment switches into protection mode automatically when the voltage is incorrect. If this
    occurs, it will not be able to carry out the normal work of filming.
    6.
    When taking pictures, the EXP button could stop the objection and then the machine goes back to the
    preparation mode.
    7.
    Use high quality tooth film and developing liquid to make clear pictures.
    8.
    Handle the ball head gently while in use, so as not to damage the delicate component.
    9.
    Do not pull hard on the cable which connects the ball head to the main unit.
    10.
    The cable connecting the ball head to the main unit cannot bear the weight of the ball head, so do not raise the ball head by holding the cable, it will cause damage.
    11.
    We usually set the time between 3-8 seconds when taking pictures, but the actual time of ray output
    is 0.2-0.5 seconds.
    12.
    If a situation occurs, preventing the machine from taking regular pictures, contact the seller to solve the problem instead of trying to service the product yourself.
    13.
    Keep the tooth film and the liquid in a proper place and use them within the shelf-life period. While, because the liquid is not allowed to ship by carrier normal, so we take it out before ship, look forward to your understanding.
    14.
    Development of films should be performed at temperatures ranging between 23-25 degrees Celsius to ensure the image quality.
    15.
    Other requests accordance with the scope of the technical parameters.
    16.
    Please read the manual carefully before using.
    X-Ray Film Holder
    Description:
    Applied for traditional or smaller dental films and wireless imaging plates (digital sensor).
    During taking picture, it’s better to put the film in the exactly position for making the ill tooth image displayed in the middle of the film.
    Reduces Patient's Oral Discomfort and Allows for Better Accuracy and Ease of X-ray Taking Procedure.
    Specifications:
    Material: plastics
    Excellent Sensor Protection
    Dental X-ray sensor positioner
    For digital sensor with line
    the clamp size can be adjusted for different imaging plates
    Satisfaction Guaranteed!
    Package:
    1, (Green) For right maxillary upper premolar/molar and left mandibular
    2, (Blue) For left maxillary premolar and right mandibular premolar/molar
    3, (Yellow) For maxillary/ mandbular incisor -Anterior teeth
    4.( 2pcs small green accessories)Special for smaller sensor, like the introduction book show.
    One suit includes 3 Pcs

    Left, Right, Upper

    300 Barrier Envelopes SIZE #2
    For use Imaging Plate (Digital Sensor), it is used to protect the IP and avoid cross inflection among the doctors and patients .
    300 Barrier Envelopes SIZE #2 for Intra Oral X-Ray ScanX Phosphor Storage Plates
    Feature:
    1.Reduce Cross-Infection.
    2.Keep the Phosphor Storage Plate Clean.
    3.Easy to use.
    4.Low cost, Disposable Use.
    5.Compatible with Scan-X Air Techniques and many other brands!
    X-Ray Film Processor
    Features:
    1. It is use view of the dental film processing design ,can wash 30*40mm single film.
    2. The machine is small size ,can be directly placed on the table ,Reliable performance, simple operation ,convenient maintenance.
    3. Opreating in the daily light can obtain the best dental image all the same
    4. The main components of this product for plastic products, with excellent corrosion resistance and strength ,qualitative light easy to move ,can be used in any solid table.
    Technical :
    Use for film size:30*40mm
    The biggest irrigation width:50mm
    Medicine tank capacity: enhancement of 250ml,fixing 250ml,250ml water
    Washing method: manual
    Developing temperature: room temperature
    Material: engineering plastic
    Net weight:1.5KG
    Products size:360*280*310mm
    Note:
    1)
    The film exposure and development time is too long, all can make the film image density is too high, film black. Too little time to film image density is low ,with lighter film.
    2)
    The film should be uniform in potions cup stir, to ensure that the wash effect.
    3)
    Time limit, potions have certain times and after each use should cover the lid of the medicine cup, depending on the manufacture`s instructions.
    4)
    if have a potion fell into eyes, rinse with plenty of water immediately.
    Packing list:
    Main machine : one set
    Three potion 250ML cup
    FDA Statement
    The sale of this item may be subject to regulation by the U.S.
    Food and Drug Administration and state and local regulatory agencies.
    If so, you can bid on this item only if you are an authorized purchaser.
    If the item is subject to FDA regulation,
    I will verify your status as an authorized purchaser of this item before shipping of the item.
    Seller name:2Byoung2016
    City,State:SHENZHEN,China
    Telephone number:0755-15236254
    Customer Service
    Welcome to our store! We are a professional foreign company selling all kinds of dental equipments.
    We have a very professional customer service team.
    We will try our best to solve problems for you. Better customer experience and satisfaction is our aim.
    From 9:00 to 17:30(Beijing time) on Mondays to Fridays
    .
    Shipping
    The goods you odered will be posted out in the second working day after the paymet has been
    made.(We will inform you via email if any delay occured due to holiday events.
    General shipping time is between 7-12 working days. (After the shipping started, the order
    will be monitored and the track of the item will be posted on paypal.
    Destination
    Delivery Time
    Working Days
    7-10
    10-15
    15-25
    25-40
    >50
    US
    Item arrived
    80%
    10%
    8%
    1%
    Refund
    ASIA
    Item arrived
    30%
    40%
    20%
    10%
    Refund
    EU
    Item arrived
    20%
    20%
    50%
    10%
    Refund
    AU
    Item arrived
    30%
    30%
    20%
    20%
    Refund
    Other countries
    Item arrived
    5%
    10%
    10%
    60%
    --
    Payment
    We accept PayPal onl
    y
    .
    The address in your paypal details will be used as the actual shipping
    address, please make sure the address is correct. If you are planning on
    combining your items,
    please make sure that you wait until ALL
    auctions have ended before you visit the checkout. All items must be
    paid within 7 days.
    Returns
    If the item you received is damaged or defective,Please contact us immidately.We will free exchange or refund.
    We will pay the return shipping costs if the product is defective or the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping charges.
    You can return your purchase for up to 15 days from the date of delivery. No refund will be issued if the product shows signs of use. Returned package must be in theoriginal packaging, everything must be in new condition, No missing parts.
    Our guarantee does not cover accidental damage or wear of product caused by customer.Thank you very much for your understanding!
    Contact Us
    We're one of the largest online dental suppliers based on many qualified manufacturers in china.If you contact us immediately after placing the order, we will make every effort to assist you with your change request.
    Unfortunately, we can not make changes or cancel an order once it has shipped. Any help,need or questions, please do not hesitate to contact us. Looking forward to our friendly & win-win cooperation!
    Feedback
    You feedback is VERY important to us.Please leave us positive feedback, an positive feedback will be automatically left for you once we receive your full payment.
    Please leave us with any concerns prior to leave negative feedback, as we can only correct issues when we are aware of them. We understand the concerns and frustrations you might have, and will try our best to resolve the issues.