BLX-8Plus Dental Portable Digital X-Ray Imaging System Mobile Machine xray SINO

Description

BLX-8Plus(US)
Product introduction:
This model combines the advantages of similar products found at home and abroad; it eliminates the shortcomings of the on-frequency X-ray machine (high current intensity and excess amounts of scrap x-rays).Using a Toshiba 0.3 micro-focus tube.The tube voltage frequency of this machine is 30 KHz，and the tube current is 1 MA. The radiation scope is at an angle of 24 degrees， located within a distance of 1.2 meters ahead. This is an innovative Chinese design named the "Green X-ray Machine."
Warning: After turning on the machine, wait for 1 minute, the voltage can be stabilized before normal use；After each photo taking, you need to wait for the normal value to return before taking a normal photo。
TECHNICAL SPECIFICATIONS：
Tube Voltage
65kv
Tube Current
1
mA
Time Exposure
0.1~~1.8
s
High pressure generator
30kHz DC
Rated Power
60w
Focal Spot To Skin Distance
>20CM
Focus Spot Size
0.
3
mm(TOSHIBA)
Charger Input Voltage
AC1
1
0V～2
2
0V
Supply Frequency
30Hz
Radiation Leakage
<20ugy/h
Battery
24V DC
2600MA
Weight
4.3KG
Dimensions
37 cm×31 cm×28cm (L×W×H)
Reference of the Angles ：
'
Tooth
Upper
Lower
1-2
42
-15
3
45
-18
4-5
30
-10
6-8
28
-5
Reference of the time of exposure：
Tooth
Adult
Child
Central & Lateral
0.
2-
0.3
s
0.2-0.3
s
Cuspid & 1st Bicuspid
0.3
-
0.4
s
0.3
-
0.4
s
Upper 5，6
0.5
-
0.6
s
0.5
-
0.6
s
Upper 7，8
1.3
-
1.8
s
1.2
-
1.5
.
s
Lower 5，6
0.5
-
0.6
s
0.4
-
0.5
s
Lower
7，8
0.6
-
0.8
s
0.5
-
0.7
s
Packing List:
Main machine   1pcs
Power line      1pcs
User manual     1pcs
Operation of the Main Unit :
Upon receiving，open the box and check the product for possible damage during shipping.
Make sure the fittings on the encasement list are packaged within the box.
Install the blue ray tube to the foreside of the ball head，then tighten it.
Turn on the Power；the pilot lamp will be light up.During this time，the digital tube will show the fore setting time. Now the equipment is in standby mode.
Setting the time (Skip to next step if unneeded) Use the "SET"，"+"，and" -" buttons to reset the time as follows: press SET，the pilot lamp above is illuminated， the machine is now in the time setting mode→then press "+" and" -" to set the time needed (time range is 1-9seconds); press set again when the time is adjusted the light lamp is off. The equipment is now in standby mode.
Put the Tooth film plumb behind the tooth which is going to be taken picture， and be as close as possible (the smooth side stick to the tooth)
Keep the ball head plumb to the tooth projection position; Have the ball head，tooth， and tooth film steadily mutually plumb.
After positioning，use the ON/OFF on the main Unit， to take pictures. (Notice: gently press 0.5 sec to turn it on)
After exposure to the tube，press the start button again in case of an emergency to stop shooting and return to standby status. (At this point there was no output ray，so the dental films can be used again).
Repeat step 6 to reset the picturing time.To repeat the picturing process，please repeat steps 7 to 9.
Turn the power off when the work is finished，press POWER， making sure the pilot lamp is off.Don't keep the machine long in standby mode.
Points for Attention:
Make sure the angle of film，tooth，and ball head are properly aligned when taking a picture. Keep them steady until the last step of picturing; making sure that there is no change in any of their positions.
Remember to turn the power 0ff when work is done.
Charge the battery if the machine cannot work and the red lamp lignt
After turning the power on，wait one minute before taking pictures，this allows the ray to provide a steady output.
The equipment switches into protection mode automatically when the voltage is incorrect. If this occurs， it will not be able to carry out the normal work of filming.
When taking pictures，the ON/OFF button could stop the objection and then the machine goes back to the preparation mode.
Use high quality tooth film and developing liquid to make clear pictures.
Handle the ball head gently while in use，so as not to damage the delicate component.
We usually set the time between 3-8 seconds when taking pictures，but the actual time of ray output is 0.2-0.5 seconds.
If a situation occurs， preventing the machine from taking regular pictures， contact the seller to solve the problem instead of trying to service the product yourself.
Keep the tooth film and the liquid in a proper place and use them within the shelf-life period.
Development of films should be performed at temperatures ranging between 23-25 degrees Celsius to ensure the image quality.
Other requests accordance with the scope of the technical parameters.
Please read the manual carefully before using.
LK-C27(US)BLX-5(US)
Payment
1.We accpet the payment via paypal, PayPal is safest, quickest and secure for seller and buyer.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
Shipment
1.We accpet the payment via paypal, PayPal is safest, quickest and secure for seller and buyer.
2.Tracking info of your parcel is available.
3.Returns could be accepted within 60 days after receipt of the item.
4.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer is responsibility.
Please check with your country is customs office to determine what these additional costs will be prior to bidding/buying.
Destination
Delivery Time
Working Days
7-12
10-15
15-25
25-40
>50
US
Item arrived
80%
10%
8%
1%
Refund
ASIA
Item arrived
30%
40%
20%
10%
Refund
EU
Item arrived
20%
20%
50%
10%
Refund
AU
Item arrived
30%
30%
20%
20%
Refund
Other Countries
Item arrived
5%
10%
10%
60%
--
Return & Refund policy
We accept returned in some exceptional cases, please send message before return item(s) otherwise returned item(s) will not be accepted.
Buyer is responsible for return shipping cost and we will ship the replacement or make the refund within 2 days after returned item is received. If it is our fault, we will be responsible for the return postage.
Feedback
We will leave feedback upon receipt from cutomer.
If you are dissatisfied for any reason, please don't be quick to leave negative/neutral feedback or open a dispute. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.
Please call five satisfaction
Item as described
Communication
Shipping time
Shipping and handing charges
About Us
We're one of the largest online dental suppliers based on many qualified manufacturers in china.
We supply all dental items with very nice qualities and the best reasonable prices for worldwide dentistry students, dentists, and other professionals.
Any interests or questions, please do not hesitate to send message. Looking forward to our friendly & win-win cooperation.
Statement
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. So you can bid it on this item only if you are an authorized purchaser. If the item is subject to FDA regulation,We have to verify your status as an authorized purchaser of this item before shipping of the item. Thanks for your understanding!
Il 20-nov-18 alle 03:29:20 CET, il venditore ha aggiunto le seguenti informazioni sull'oggetto: